Verification testing for single blade installation

Senvion, one of the leading wind turbine manufacturers, is characterized by their high quality and safety standards. For this reason, Senvion carries out verification measurements with imc systems for each single blade installation. In doing so, the braking forces acting on the gearbox are checked during rotor blade installation, as it must always be ensured that the limits speci-fied by the manufacturer are not exceeded. To prevent the brake from overheating, Senvion carries out temperature measurements. The hydraulic pressures are also acquired through measurement systems. Furthermore, the gondola position as well as the wind speed and direction must be measured.

Download: application note

testing wind energy installations
(c) Photo: Senvion
Top